Description
This Barb stallion was created as a 3D model by the talented artist Rudzia and slightly modified by A&M. It is only available in our shop. The bridle is printed directly onto the horse and is not removable. You can buy him from us as an ABS resin model horse from the 3D printer in various scales.
Our ABS resin prints are characterized by a smooth surface and there is not too much post-processing needed for the customer. However, you may still find areas to sand in the "own post-processing needed" version. If you order your horse paint-ready with primer, you can start painting immediately. Unfortunately, it does not mean that your print will be painted, it is only ready for painting.
From 1:12 scale, large prints are printed hollow, but we cure our prints from the inside and outside! Should a product in 1:12 be smaller (e.g., cat, foal, etc.), we will, of course, still print it solid.
We deliver all our prints without support structures, so you don't have unnecessary work and waste. Thanks to secure packaging of the models, damage rarely occurs.
We never ship our prints unprocessed (except for B-stock). This means they are pre-sanded by us to the extent that you won't have much work left to do. However, you will still have a little work before painting :).
Ready for Painting Service: If you choose the option "ready for painting including primer," you can start painting directly at home.
Our prints are not intended as toys. Small parts, among other things, could break off and be swallowed. We therefore recommend our products for ages 14 and up.
🚫 Not food-safe and not suitable for mouth contact
- No food contact: This product is not food-safe or certified for contact with food or beverages. Never use it as tableware, cutlery, or for food storage. The product must also not be put into the mouth.
🧸 Not suitable as a children's toy
- Not a toy: This product is a decorative or collector's item (e.g., miniatures, housings, models) and not a certified children's toy according to the Toy Safety Directive (2009/48/EC).
- Choking hazard: Resin parts can break or splinter under strong mechanical stress. Sharp-edged small parts may be created, posing a risk of injury and choking.
🧼 Handling and skin contact
- Fully cured: The product is thoroughly cleaned and post-cured under UV light before shipping. In its cured state, the material is harmless when touched normally.
- Skin irritation: Should the product unexpectedly feel sticky, wash your hands thoroughly with soap and water immediately. In this case, avoid further skin contact and contact us for a replacement model.
☀️ Storage, care, and material properties
- UV sensitivity: ABS resin can change color (yellow) and become brittle if exposed to direct, long-term sunlight (UV light). Ideally, store the product indoors away from continuous direct sunlight.
- Heat sensitivity: Do not expose the product to high temperatures (e.g., dishwasher, microwave, near direct heat sources, or in a car during summer). The material may deform or lose stability.
⚖️ Disclaimer
- Personal responsibility: Use of this product is at the buyer's own risk.
- Limitation of liability: The manufacturer/seller assumes no liability for damages, injuries, or consequential losses resulting from improper handling, misuse, or failure to follow these safety instructions.
