Description
This stunningly detailed Gypsy Wagon is now available from us as a kit made from 3mm MDF panels. Once assembled, you'll be amazed at the attention to detail the creator of the laser file has put in. The doors and wheels of the wagon are fully movable. Even the interior of the wagon has been furnished.
The lovingly created original file comes from Vectorpainter.
This Gypsy Wagon is currently only available in a scale of 1:24/1:20. The wagon is supplied as a kit made from MDF panels. In addition, after purchase, you will receive a PDF assembly instruction via email. We are always available for any questions. We recommend glue or hot glue for fixing the individual components.
Dimensions of the wagon:
Length approx. 40 cm, height approx. 23 cm, width top approx. 17.5 cm, width bottom approx. 12 cm
Why MDF panels and not pine wood?
In our experience, thin pine wood panels, which are actually common for laser cutting, are very susceptible to fluctuations in humidity. Wood of this thickness tends to warp after some time (unless it has been sealed airtight with paint). We have not observed this problem with MDF panels. Furthermore, no edges with splinters are created, which would otherwise have to be laboriously sanded before assembly. MDF panels can also be easily prepared with primer for direct painting afterward.
We deliver all our prints without support structures, so you don't have unnecessary work and waste. Thanks to secure packaging of the models, damage rarely occurs.
We never ship our prints unprocessed (except for B-stock). This means they are pre-sanded by us to the extent that you won't have much work left to do. However, you will still have a little work before painting :).
Ready for Painting Service: If you choose the option "ready for painting including primer," you can start painting directly at home.
Our prints are not intended as toys. Small parts, among other things, could break off and be swallowed. We therefore recommend our products for ages 14 and up.
🚫 Not food-safe and not suitable for mouth contact
- No food contact: This product is not food-safe or certified for contact with food or beverages. Never use it as tableware, cutlery, or for food storage. The product must also not be put into the mouth.
🧸 Not suitable as a children's toy
- Not a toy: This product is a decorative or collector's item (e.g., miniatures, housings, models) and not a certified children's toy according to the Toy Safety Directive (2009/48/EC).
- Choking hazard: Resin parts can break or splinter under strong mechanical stress. Sharp-edged small parts may be created, posing a risk of injury and choking.
🧼 Handling and skin contact
- Fully cured: The product is thoroughly cleaned and post-cured under UV light before shipping. In its cured state, the material is harmless when touched normally.
- Skin irritation: Should the product unexpectedly feel sticky, wash your hands thoroughly with soap and water immediately. In this case, avoid further skin contact and contact us for a replacement model.
☀️ Storage, care, and material properties
- UV sensitivity: ABS resin can change color (yellow) and become brittle if exposed to direct, long-term sunlight (UV light). Ideally, store the product indoors away from continuous direct sunlight.
- Heat sensitivity: Do not expose the product to high temperatures (e.g., dishwasher, microwave, near direct heat sources, or in a car during summer). The material may deform or lose stability.
⚖️ Disclaimer
- Personal responsibility: Use of this product is at the buyer's own risk.
- Limitation of liability: The manufacturer/seller assumes no liability for damages, injuries, or consequential losses resulting from improper handling, misuse, or failure to follow these safety instructions.
